FY EP Sci-Tech Co., Ltd
FY EP Sci-Tech Co., Ltd Professional Manufacturer Of Water Test Products Whatsapp/Wechat: +86 18595638963 Email: una@ectdsphmeter.com
Add to Cart
Temperature Compensation Probe 3 In 1 TDS And Conductivity Meter :
Influencing Factors For TDS And Conductivity Meter :
1. Water temperature: EC conductivity meter can not be used to measure high temperature
solution.
2. Water flow rate: The EC meter cannot be used to measure a flowing or sloshing solution.
3. Area: Each area, urban pipelines and water sources are different, and the TDS values are
different.
Instructions For TDS And Conductivity Meter :
First remove the cap and press the "ON/OFF" button to turn on the EC&TDS meter. Then
insert it into the test solution to the water line position and gently agitate to remove the
bubbles in the test solution. Wait for 1-5 seconds till the value is stable, press the "HOLD"
button to lock the value and take it out of the water.
Note: After use, dry the water on the meter tip, cover the cap, and keep it in a safe place.
Technical Parameters Of TDS And Conductivity Meter :
| Conductivity | 0-9990us/cm |
| TDS | 0-9999 ppm |
| Degrees Celsius | 0.1-80.0 ° C |
| Fahrenheit | 32.0-176.0 ° F |
| Accuracy | ± 2% |
| Weight | 55g |
| Dimension | 154 x 30 x 14 (mm) |
